作者:點膠機 點擊量:94

Yellow glue is a conventional type of glue, which has a wide range of applications. Before, it was basically used by hand. The first machine cost is high, the second glue viscosity is large, and it is not good for dispensing. With the improvement of dispe.

作者:點膠機 點擊量:115

Desktop full-automatic screwing machine is a platform type machine produced by our company, with a height of about 630mm and a small volume. It is suitable for placing on the assembly line platform. It requires a manual cooperation, placing and taking pro.

作者:點膠機 點擊量:210

The uniformity of glue dropping is directly related to the equipment. The equipment used together is very corresponding to the product. It fundamentally solves the problem. The glue dropping requirements of each product will be different. For example, the.

作者:點膠機 點擊量:96

Dispensing and locking screw are the same series of products. The machine platform is basically the same, mainly in different working methods. The system uses locking screw and dispensing system, but the application direction is different. The operating p.

作者:涂膠機 點擊量:83

With the issuance of the national policy, from June 1 this year, the whole people implemented the policy of one helmet and one line. Helmets have become the new air vent after masks in China. Our company manufactures automation equipment, especially in di.

作者:涂膠機 點擊量:212

At present, there are three kinds of conventional dispensing systems: constant control, full-time and PLC. The desktop type basically uses the first two kinds. Some high-end basic PLC as dispensing system has more stable control performance, which can con.

作者:涂膠機 點擊量:116

Screw dispensing valve, as a high-end valve with high precision at present, is controlled by electric and air pressure. The air pressure can drive the glue of dispensing syringe forward. The voltage provides motor and screw power to transport the glue out.

作者:涂膠機 點擊量:152

High viscosity liquid dispensing is a problem that every dispensing equipment manufacturer has to face. How to achieve the dispensing task, the manufacturer has its own set of methods. Lets talk about how the Chinese manufacturers in Dongguan City of our .

作者:涂膠機 點擊量:91

The gluing technology is determined by the machine manufacturer, because the manufacturers production technology determines whether it can meet the production demand. There are many manufacturers of gluing machine, but not all manufacturers have the same .

作者:涂膠機 點擊量:103

In fact, silica gel for handboards is the glue used to make molds. Although it belongs to one of the silica gel types, it is only used in different ways, but it is not suitable for the use of full-automatic glue filling machine. Which kind of mold machine.